ZOWIE XL2586X+the 600 Hz TN panel almost every CS2 pro now plays on
The tournament default. A 24-inch 1080p TN panel running at 600 Hz with DyAc 2, built for one job: making a moving target readable while you spray. It is also the hardest monitor on this site to justify unless your PC genuinely pushes several hundred frames in CS2.
- Size
- 24 inches
- Resolution
- 1920 × 1080
- Refresh
- 600 Hz

Strengths
- 600 Hz on a TN panel: the lowest motion blur you can currently buy, which is why it is the monitor on nearly every CS2 stage
- DyAc 2 backlight strobing keeps a strafing enemy legible mid-spray, where a normal panel smears them
- Black eQualizer and Color Vibrance are the two settings pros actually change, and they live in the monitor rather than the GPU driver
Trade-offs
- 600 Hz only pays off if CS2 actually runs at those frame rates: below roughly 300 fps you are buying headroom you never reach
- TN means the worst colour and viewing angles of any panel type — this is a competition tool, not a monitor for photo work or films
- No G-Sync and no FreeSync, so screen tearing is handled by raw frame rate instead of adaptive sync
- 1080p on 24 inches is deliberately low resolution; it is the esports standard, not an upgrade over a 1440p screen
Why this panel is on every stage
Twenty-four of the forty-nine professional configurations tracked on this site run an XL2586X+, and twelve more run the 360 Hz XL2566K. That is not sponsorship alone: the panel does one measurable thing extremely well.
At 600 Hz a new frame arrives every 1.7 ms. Combined with DyAc 2, ZOWIE’s backlight strobing, an enemy strafing across your crosshair stays a readable silhouette instead of becoming a smear. That matters most in exactly the situation CS2 decides rounds in: spraying at a target that is already moving.
The honest limit
A 600 Hz panel cannot invent frames. If CS2 runs at 200 fps on your machine, the monitor spends two thirds of its refreshes showing you a frame you have already seen. The jump from 144 Hz to 240 Hz is noticeable to most players; the jump from 360 Hz to 600 Hz is measurable but far smaller, and it only exists at all if your frame rate is there to feed it.
Check your actual CS2 frame rate before buying this instead of a 240 Hz screen. That number, not the panel, is what limits you.
What to set once it arrives
Two settings do nearly all the work, and both live in the monitor’s own menu: Black eQualizer, which lifts dark areas so a player in shadow is visible, and Color Vibrance, which saturates colour so models separate from the map. Professionals run them between 10 and 20 and between 10 and 20 respectively — start in the middle and adjust on a map you know well.
Leave DyAc 2 on. Turn V-Sync off.
Verdict
The correct monitor if your PC earns it, and an expensive way to look professional if it does not. Confirm your frame rate first, then buy the panel that matches it.
Sources and limits
Panel specification as published on the product listing and cross-checked against the configurations tracked on ProSettings.net, read 13 November 2026. This is a specification-based buying assessment, not an independent laboratory or hands-on test. Check the selected version, seller, stock, delivery and current price on Amazon.
Ranked in
Updated 13 November 2026
Same category
